posted
Hello everyone, I have a 99 6speed C5 and the past couple of days a few things have started. When i start the car and get going, its says Active Handling warming up, than about 5 min later it say to service active handling. What can i do to remedy this , cost etc? Also my Right Rear tire sensor is giving me false readings. its reading around 24psi when there is about 35 psi in them. What can i do for that as well. Thanks alot guys. Jay
Posts: 10 | From: California | Registered: May 2008
| IP: Logged |
Tires should be set to 30 PSI COLD. If the sensors are far off, chance are it's on its way out.
Posts: 4601 | From: Long Island, NY | Registered: Nov 2000
| IP: Logged |
posted
LDCM had 6 codes RDCM had 6 codes RFA had 3 codes
LDCM and Right hand Control Moduale both had corresponding Key Circuit Switches, Batterty Circuits and Vertical Position Sensor Circuit codes.All which were "H" coded for last 40 to 50 turn ons.
RFA was LOC with IPC,BCM and PCM
Posts: 10 | From: California | Registered: May 2008
| IP: Logged |
posted
You need to list each code. There should be something in the PCM, TCS, or BCM to relate to the Active Handling issue you are having.
Posts: 4601 | From: Long Island, NY | Registered: Nov 2000
| IP: Logged |
Printer-friendly view of this topic