posted
My Z06 seems to be extreamly low to the ground. The car only has 26,000 miles and the original tires. Can someone with a none lowered car provie me the clearance from door rocker panel to pavement? I am just curious if the car has been lowered. Thanks for any help, Steve
Posts: 12 | From: Birchwood TN | Registered: Jan 2010
| IP: Logged |
posted
Steve, the clearance figures you are looking for can vary greatly from car to car depending on what wheels and tires the car is wearing. Here is a link to the process used to lower a C5. If you notice there are pictures of the body bolts that lower or raise all C5's, including Z06's. Take a look at the stock bolt prior to lowering and compare them to your bolts. I hope that this helps. Mike http://www.z06vette.com/forums/f117/diy-lowering-your-c5-107705/Posts: 1843 | From: Beautiful NW Arkansas | Registered: Nov 2002
| IP: Logged |
posted
If you think it's too low, adjust it up a little. I raised my C6 about 1/2" from the factory settings so I don't scrape on some of the local speed bumps.
A set of Rocker Rails will prevent body panel damage if you do hit something Posts: 2552 | From: North Augusta, SC | Registered: Apr 2003
| IP: Logged |
![[Thumbs Up!]](graemlins/thumbsup.gif)
Printer-friendly view of this topic