New topic added to DIY section - Replacing Spark Plugs and Wires

Click here to
show your support
for the NCM
and C5Forum.

Home

Discussion Forums

Do It Yourself

Articles About Your Corvette

About This Site

You are not logged in. [Log In] C5Forum.com » Forums » C5 Specific Topics » C5 Technical and Performance » New topic added to DIY section - Replacing Spark Plugs and Wires

Topic Options

Rate This Topic

#34288 - 01/03/01 12:04 PM New topic added to DIY section - Replacing Spark Plugs and Wires
kewlbrz Junior Member Registered: 12/05/00 Posts: 11 Loc: DFW (Carrollton), TX	Check out the write up I did on installing new plugs and wires in a C5. Any feedback is apprecaited. http://www.c5forum.com/diy/sparkplugs.html ------------------ 2000 MN6 http://www.vetteguru.com Mods: BPP MAF Ends w/airfoil BPP Vortex Carbon Fiber Rammer BPP PowerDuct w/Coupler BPP TB Coolant Bypass Ford SVO 30# Injectors MAF Translator / AutoTap !CAGS V1 hardwired LS6 Fuel Rail Covers 13.39 @ 104.78 (bone stock) 105F/80%humidty DynoJet 317.1rwhp / 324.9 rwtq (bone stock) -shawn _________________________ 2000 Silver/Black/Black - 6 Speed Ragtop C5 DOB - 56th of 151 - built on 03/21/00 79' White/Red L82 4-speed Vette (destroked 400ci (377ci) Drag Motor w/ 4.10:1 gear) MODS - w/how to\'s \|Vortex\|Powerduct\|MAF-Ends\|TB-Bypass\|FMS-30#-SVO-Injectors\| \|Magnecor-8.5mm-Wires\|NGK-TR55-Plugs\|B&B-PRTs-w/Speedway Tips\| \|MAF-Translator\|!CAGS!CL\|V1-Hardwired\|RedLine Oils\|B&M Ripper\| TIMESC5 Times - Texas MotorPlex - Ennis, TX 03/09/01 12.90 @ 109.84 - 2.08 60ft - on runflats Cruize in II - Beach Bend - Best Trap 111mph Speedworks DynoJet - Lewisville, TX 327.5 rwhp / 337.7 rwtq (SAE Factor .97) - 01/27/01 -shawn
Top

#34289 - 01/03/01 01:06 PM Re: New topic added to DIY section - Replacing Spark Plugs and Wires
ck98c5 Member Registered: 11/29/00 Posts: 425 Loc: Charlotte, NC, USA	Nice write up ... one little edit you may want to make -> you misspelled nitrous when talking about using the NGK TR6 plugs for nitrous or highly modified engines. later, Craige ------------------ Craige K12 98 Coupe, Black/Oak, Z51, 'Redlined' M6, B&M Ripper/MOMO, TRIC, B&B TriFlow Sports, !CAGS, MAF Translator, MSD Wires, NGK TR6, NX N2O 100 shot, Optima RedTop, Lowered, Black LLoyd Mats, V1, Y2K wheels, Zaino Shine 393 RWHP / 525 RWTQ on the happy gas! I need to visit the dyno again since doing more mods/tuning! _________________________ Craige 2002 Z06 - Red/Black, Momo, !CAGS, Donaldson Blackwing, MAF Translator, LLoyd Mats, V1
Top

#34290 - 01/15/01 12:26 AM Re: New topic added to DIY section - Replacing Spark Plugs and Wires
Redshift Full Throttle Member Registered: 11/28/00 Posts: 3861 Loc: Raleigh, NC	Fixed the errors. Anyone find anything else to comment about? Again, great work kewlbrz. _________________________ Brian - C5Forum Founder and Administrator 2001 M5 * 1997 M3 Evo * 2003 540 wagon * 2002 330Cic * 2008 F800ST (bike) Manager of PFYC.com - a Lifetime Member of NCM!
Top