Click here to
show your support
for the NCM
and C5Forum.

Home Discussion Forums Do It Yourself Articles About Your Corvette About This Site

Topic Options
Rate This Topic
#109626 - 11/17/11 12:07 PM 2009 ZHZ Convert seat problem
Ted Offline
Engine Warming Up

Registered: 07/12/01
Posts: 36
Loc: San Benito County, California
Yesterday I bought a 2009 ZHZ Convert and find that the driver seat bolster and seat sides do not activate. Could it be a fuse problem and if so where is the fuse located? I really liked my 1998 Pace Car but this machine is AWESUM!.

Top
#109627 - 11/17/11 04:16 PM Re: 2009 ZHZ Convert seat problem [Re: Ted]
Chewy Offline
Full Throttle Member

Registered: 04/06/03
Posts: 3287
Loc: North Augusta, SC
Welcome

In the passenger footwell fuse box it's the one labeled as DRVR HTD SEAT, it should be a 20 amp fuse.

If you can hear the pump when you try to inflate, then it's probably a loose tube, which means you probably have to take off the seat cover to get to it.
_________________________
Former: Silver '01 Coupe, LeMans Blue '07 Coupe

Current: 2012 Centennial Edition GS Coupe w/3LT & NPP mods list

Top
#109632 - 11/18/11 10:35 AM Re: 2009 ZHZ Convert seat problem [Re: Chewy]
Ted Offline
Engine Warming Up

Registered: 07/12/01
Posts: 36
Loc: San Benito County, California
Thanks for the information on fuse location. I do not hear the pump working so will check the fuse. The power seat still works so is it on the same fuse as the bolster?

Top



Moderator:  BruceF, hcvone, J.B., Redshift