Hi, There, C4C5 tech. Long time no see. looking in to code 1225. harness shows, 1.004K ohms, generates voltage when I spin da rotor. Had tons of ice mode last track day. this code set. I tapped brake w left foot before brake zones to reset ice mode. Would this code, or 1233 or 1247(all set both C and H) cause it to be more sensitive going in to hard braking? I am pretty careful not to "stab" the pedal, but firmly squeeze it on. Thanks for any advice.
_________________________
Bob Rothwell
Home Track, Pacific Raceways Roadcourse.